Ultimate Steroid Homebrewing Guide

The Brew

The process that needs the most immediate attention for the most extended period of time is the brew. This is because it's crucial to stick to a fixed schedule and carefully watch how the brewing process develops. This process comprises several equally important sub-processes, including mashing, lautering, and boiling.

The quality of steroids must be as high as possible throughout this period; thus, everything must be done perfectly. Your final product will be built upon these essential brewing procedures. It is crucial to use extreme caution when making home brew. Both an excessive dose and an inadequate dose will produce an undesirable outcome.

Keep in mind: You'll make mistakes the first few times as you learn how to make steroids at home. Don't allow this to make you feel down or discouraged. Everyone has a learning curve, and mistakes will be made. Please note your mistakes, acknowledge them, and learn from them.

This article serves as a how-to for brewing 100 ML of 250 mg/ml testosterone enanthate at home.

It's critical to understand what testosterone enanthate is before beginning the process.

What is testosterone enanthate?

A testosterone enanthate is an injectable form of testosterone that functions similarly to the body's natural sex hormone. Testosterone is responsible for the growth and maintenance of numerous masculine characteristics during puberty. Testosterone enanthate works by increasing or substituting testosterone in the body to normal and healthy levels.

People constantly search for methods to gain an advantage over others as cutting-edge bodybuilding becomes more prominent. Testosterone enanthate is one of the most popular testosterone steroids, which illustrates such a supplement. It functions as an androgen as well as an anabolic steroid.

What does Testosterone enanthate do to your body?

Improved recovery

Testosterone enanthate aids in tissue healing, and speed up the body's recovery. Even after working out hard in the gym, it boosts protein synthesis and tissue recovery. 

Reduction in body fat

Testosterone Enanthate has been demonstrated to be an efficient way to decrease body fat. However, many people may feel like they need to exercise more, eat healthily, and eat less. But if you're a bodybuilder, you won't lose your muscle; you'll lose the body fat that covers them.

Testosterone Enanthate allows you to keep your muscles and, better yet, helps them to become more defined. You'll stay in better physical form with less body fat. 

Increased muscle mass

Testosterone-enanthate also aids in muscle growth in bodybuilding. It increases the red blood cell formation in the bone marrow which ultimately aids in gaining muscle mass. The hormone cortisol, which causes muscle loss by catabolizing it, is also blocked by testosterone enanthate.

Increased strength

The fact that increasing strength is related to significant gains in muscle mass is one of the reasons why many bodybuilders would do everything to get it. One of the top steroids, testosterone enanthate, will help you gain the energy and strength needed to lift weights. 

How to make Testosterone Enanthate homebrew step by step

The step-by-step process for making testosterone enanthate is provided and explained below. Visit "How to calculate steroid concentration before brewing?" for your steroid concentration calculation.

Before you start homebrew, there is a list of items you need.

Ingredients required

• 62.5 grammes of testosterone enanthate powder
• 250 mg per ml of testosterone enanthate
• 5ml (2%) of Benzyl Alcohol (BA).
• 50 ml (20 ml) of benzyl benzoate (BB).
• 148.13 ml of grapeseed oil

Tools required

• A hand crimper.
• Ten sets of 10 ml-capacity vials (each set should include a cap, rubber stopper, and vial).
• A 22 um Syringe filter
• A syringe with a 20 mL/60 ml capacity and an 18–21 gauge needle.
• A 3mL syringe with a needle of gauge 18–21
• A frying pan
• 100-mL Beaker with Glass Rod
• Numerous little bits of paper
• A digital weighing device (+-0.1 or 0.01)

Testosterone Enanthate homebrew step by step

• Step 1: Weigh the powdered testosterone enanthate in step one
• Step 2: Now put the powder into the beaker
• Step 3: Add 2 ml of BA
• Step 4: Add 2 ml of BB
• Step 5: Heat the beaker in a water bath
• Step 6: Add grapeseed oil
• Step 7: Pour the oil in and attach the vacuum pump
• Step 8: Filtering
• Step 9: Crimp them with flip-off caps

Below are the detailed steps on how to homebrew Testosterone Enanthate 

Step 1: Weigh testosterone enanthate powder

To use the right and precise amount of testosterone enanthate, weighing the powder before starting the process is important. Grab a little piece of paper and set it on the scale to determine the exact weight.

Press the tare to reset the scale to zero so that you may weigh the powder without accounting for the weight of the paper. Now that the powder is added, you may do it gradually to prevent adding too much and constantly taking it out.

You may need to reset the scale whenever you need to add powder because it weighs so little. The best method is adding a little powder, pressing the scale down, and letting the number return to zero. You are now ready to travel after you are certain that you have weighed your 25 grammes precisely. To confirm that you are using the precise amount of testosterone enanthate powder required to prepare your homebrew, weigh the substance.

Step 2: Now put the powder into the beaker

After weighing and measuring the powder, put it into your beaker.

Step 3: Add 2ml of BA

1. Place the weighed powder into a beaker.

2. Add 2ml of Benzyl Alcohol

Adding Benzyl Alcohol serves primarily as a sterilizing agent. The oils and powders are all kept together since it also functions effectively as a solvent. Another often-used solvent is benzyl alcohol, which has the benefit of making injections less painful.

Step 4: Add 2 ml of BB.

1. Place the weighed powder into a beaker.

2. Add 2ml Benzyl Benzoate. 

Step 5: Heat the beaker in a water bath

Although this step is optional, you shouldn't omit it if you want the procedure to go successfully. Grab a pot and add approximately an inch of water to it. Place it near a heat or stove, and let it warm up. The beaker should be placed in a pan. Put a few centimetres of water in the pan.

Watch the powder dissolve as it comes closer to becoming clear while keeping an eye on it. The mixture has melted if the solution is clear.

All of this helps the powder completely dissolve in the solvents. When there is no visible powder, move on to the next step. Below is the picture for more clarification.

Step 6: Add grapeseed oil

Now add carrier oil, also called grape seed oil, once the mixture cools. After adding it, let it warm up to make filtering faster. After heating it properly, mix it well. 

While waiting for the powder to dissolve, set up the filter device that sets up a cap for the bottom collection part. The oil can be filtered while it is still warm.

It is thinner and contains anaesthetic qualities, which makes it more useful than others. It helps in tissue healing. 

Step 7: Pour the oil in and attach the vacuum pump

After mixing grape seed oil properly, the next step is to pour the oil in, attach the vacuum pump, and set the temperature between 300-400. 

Step 8: Filtering

Drawing up the solution into a syringe that will use to filter. Use a single big syringe or several smaller ones, then repeat the procedure as desired.

Remove the 0.22um syringe filter from its packaging, then attach the green needle to the syringe's smaller side. Clean the sterile vial's top with an alcohol swab before inserting the green needle. In the vial, insert the needle connected to the syringe filter.

All completed steroids must go through this extremely important phase. It is typical for the filter to become clogged while the filtration process is taking place.

However, the amount of time needed to filter a solution varies on both the steroid and the mg/ml of the substance. The procedure is finished once the filtering in the sterile container is finished.

Step 9: Crimp them with flip-off caps

Seal your solution using flip-off caps. Try to do this step in a clean room.

Start your steroids homebrew from Testosterone

Making your home-brewed steroid utilizing testosterone is the best option to remodel the physique. The greatest homemade steroid is testosterone because your body is used to it. It is naturally created by the body and promotes growth, healing, and health.

Low testosterone levels cause an increase in body fat and weight. The greatest approach to increase your athletic performance, endurance, and muscle mass is by using testosterone supplements. Making homemade steroids has the benefit of allowing you to achieve your desired increases in the gym without spending more money. 

Disclaimer: SteroidWiki doesn't promote unlawful usage of any chemical compound. The knowledge presented in this article and on the website is purely for educational purposes. If you intend to use the information provided in this article for any purpose, please make sure to check & comply with the laws of your country or area.